Caller list

Caller ID Service

Category settings for phonebook

Category settings can help you identify who is calling by using different ringer tones and display colours for different categories of callers. When adding an entry to the phonebook you can assign it to the desired category (page 19). When a call is received from a caller assigned to a category, the category’s display colour and ringer tone you selected are used.

Changing category ringer tones

If you select “Default Ringer”, the unit uses the ringer tone you set on (page 22) when calls from this category are received. The default setting is

“Default Ringer”.

1n (left soft key) i K

2{V}/{^}: “Category” i M

3{V}/{^}: Select a category. i M

4{V}/{^}: Select the current setting of the category ringer tone. i M

5{V}/{^}: Select the desired ringer tone. i M i {ih}

Changing category display colours

If you select “Default Colour”, the unit uses the display colour you set on (page 23) when calls from this category are received. The default setting is

“Default Colour”.

1n (left soft key) i K

2{V}/{^}: “Category” i M

3{V}/{^}: Select a category. i M

4{V}/{^}: Select the current setting of the category colour. i M

5{V}/{^}: Select the desired colour. i M i {ih}

Important:

L Only 1 person can access the caller list at a time.

Viewing the caller list and calling back

1K (centre of joystick) i j i

2Push the joystick down to search from the most recent call, or push the joystick up to search from the oldest call.

3To call back, press {C}. To exit, press {ih}.

Note:

LIf the item has already been viewed or answered, “Q” is displayed, even if it was viewed or answered using another handset.

LTo erase the item, press W. i {V}/{^}: “Yes” i M

LIf the call matches an entry in the bar call list, the number is logged with 7 (page 28).

LIf you do not want to dial the area codes when making calls from the caller list, you can store the area codes which you want the unit to delete automatically (page 27).

Editing a caller’s phone number before calling back

The caller’s telephone number, which is sent to your telephone from your local telephone exchange, includes “0” and an area code prefix. For local calls, “0” and the area code prefix can be omitted.