2.5 Date and time (KX-MB1520
only)
We recommend you to set the date and time. The other
party will receive your unit’s date and time as the header
information.
MSetN MFNMEN
MMenuN
MFaxN
1MMenuN A MBNM1NM0NM1N A MSetN
2Enter the current month/date/year by selecting 2
digits for each.
Example: August 3, 2011
M0NM8N M0NM3N M1NM1N
3Enter the current hour/minute by selecting 2 digits for
each.
Example: 10:15 PM (12 hour clock format)
1. M1NM0N M1NM5N
2. Press MGN repeatedly to select “PM”.
4MSetN
5Press MMenuN to exit.
Note:
RTo check the current date and time setting,
temporarily change the unit to the fax mode by
pressing MFaxN repeatedly (page 17).
RYour unit’s date and time will be used as the header
information for the following:
– When sending faxes (page 34).
RIf the date and time is not set correctly, the other party
will receive an incorrect date and time as their
header. This may confuse the other party.
RThe accuracy of the clock is approximately ±60
seconds a month.
To correct a mistake
Press MFN or MEN to move the cursor to the incorrect
number, and make the correction.
If you have subscribed to a Caller ID service
The date and time will be automatically set according to
the received caller information.
RIf the time has not previously been set, Caller ID will
not adjust the clock.
RYou can turn this feature OFF (feature #226 on
page 48).
2.6 Your logo (KX-MB1520 only)You can program your logo (name, company name, etc.)
so that it appears on the top of each page sent.
MSetN MFNMEN
MMenuNMStopN
1MMenuN A MBNM1NM0NM2N A MSetN
2Enter your logo, up to 30 characters (see page 57
for character entry). A MSetN
3Press MMenuN to exit.
To correct a mistake
Press MFN or MEN to move the cursor to the incorrect
character, and make the correction.
RTo erase all characters, press and hold MStopN.
For assistance, please visit http://www.panasonic.com/help 19
2. Preparation