3. Close the front cover. 12.1.2 When the recording paper is not fed
into the unit properly
The display will show the following:
–“CHECK PAPER #1 PRESS START”
1Pull the paper input tray completely out.
2Re-load the recording paper.
3Insert the paper input tray into the unit.
Note:
RIf the message is still displayed, check the recording
paper specifications and load the recording paper
again. See page 13 for details.
12.1.3 When the recording paper in the
manual input tray is not fed into the unit
properly
The display will show the following.
–“CHECK PICK UP INPUT TRAY #2”
1Remove the recording paper.
2Re-insert the recording paper.
Note:
RIf the message is still displayed, check the recording
paper specifications and re-install recording paper.
See page 16 for details.
70
12. Paper Jams