6.6 Receiving a fax manually :Auto answer OFF
RA4 or letter size recording paper can be used.

6.6.1 Activating TEL mode

Press MFax Auto AnswerN repeatedly to display “TEL
MODE”.
RThe MFax Auto AnswerN light turns OFF.
MStartNMSP-PhoneN

Fax Auto

Answer

Note:
RIf you do not answer the call within 10 rings, the unit
will temporarily switch to fax reception. The other
party can then send a fax.
How to receive phone calls and faxes
1. Press MSP-PhoneN to answer the call.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press MStartN, and then M2N.
Note:
RTo stop receiving, see page 58.
How to receive faxes with an extension telephone
If you have another telephone connected to the [EXT]
jack or the same line (extension telephone), you can use
the extension telephone to receive faxes.
1. When the extension telephone rings, lift the handset
of the extension telephone.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press MGN MBN M9N (default fax activation code)
firmly.
3. Replace the handset.
Note:
RTo stop receiving, see page 58.
RTo receive fax documents using the extension
telephone, make sure remote fax activation is turned
ON (feature #434 on page 52) beforehand. The
default setting is ON.
38
6. Fax (KX-MB1520 only)