5.2 More copying features
RMake sure that the MCopyN light is ON.

5.2.1 Zoom copy (enlargement / reduction)

1Set the original (page 18).
2Press MZoomN repeatedly to select the zoom rate that
fits the size of your document and recording paper.
–“ZOOM =100%”*1
–“50%”
–“200%”
*1 Press MCN or MDN repeatedly to change the zoom
rate by 1 % at a time from “25%” to “400%”.
You can also enter the desired percentage
specifically by using the dial keys.
3MSetN
4If necessary, enter the number of copies (up to 99).
A MStartN
5After you finish copying, press MStopN to reset this
feature.
Note:
RZoom copy is not available for the following features:
– Quick ID copy feature (page 30)
– Image repeat feature (page 30)
– Poster feature (page 31)
– N in 1 feature (page 31)
– Separate N in 1 feature (page 32)
RYou can hold the previous zoom setting (feature #468
on page 54).
RThe unit will only enlarge the right top corner of the
document starting from the mark on the unit.
Example: 150 % enlarged copy
Original document Enlarged copy
Example: 70 % reduced copy
Original document Reduced copy

5.2.2 Collate copy

The unit can collate multiple copies in the same order as
the original document pages.
1If the MCopyN light is OFF, turn it ON by pressing
MCopyN repeatedly.
2Set the original (page 18).
3Press MFN to display “COLLATE”.
4Press MCN or MDN repeatedly to display “ON”.
5MSetN
6Enter the number of copies (up to 99).
7MStartN
RThe unit will scan 1 page.
8Place the next document on the scanner glass and
press MSetN. Repeat this until you have scanned all
pages, and then press MStartN.
RThe unit will start copying.
9After you finish copying, press MStopN to reset this
feature.
Example: Making 2 copies of a 4-page original
document
4
3
2
1
4
3
2
1
4
4
3
3
2
2
1
1
Collated pages Uncollated pages
29
5. Copier