Note:
RThe unit will store the documents into memory while
collating the copies. If the memory becomes full while
storing, the unit will only print out the stored pages.
RYou can hold the previous collate setting (feature
#469 on page 54).
5.2.3 Quick ID copy feature / Image repeat
feature
Quick ID copy feature: To copy 2-sided documents
onto one page.
Image repeat feature: To copy a single document
repeatedly onto one page.
Note:
RThe copied documents will not be reduced to fit the
recording paper, and useful for copying small sized
documents such as business cards.
1Set the original (page 18).
RTo make a landscape copy, set the original in
landscape direction. To make a portrait copy, set
the original in portrait direction.
RThe scanning area changes according to the
selected setting in step 4. See the following table
for details. The shaded area will be scanned.
2Press MPage LayoutN repeatedly to select “PAGE
LAYOUT”.
3Press MCN or MDN repeatedly to select “QUIK ID
COPY” or “IMAGE REPEAT”. A MSetN
4Press MCN or MDN repeatedly to select the number of
original documents from “2 in 1”, “4 in 1” or “8
in 1”. A MSetN
RFor quick ID copy feature, go to the next step.
RFor image repeat feature, go to step 6.
5Press MCN or MDN repeatedly to select the page layout
from “LANDSCAPE” or “PORTRAIT”. A MSetN
6If necessary, enter the number of copies (up to 99).
7Quick ID copy feature:
1. MStartN
RThe unit will scan 1 page.
2. Place the next document on the scanner glass
and press MSetN. Repeat this until all the
documents are scanned.
RThe unit will start copying.
RYou can press MStartN anytime to start
copying.
Image repeat feature:
MStartN
8After you finish copying, press MStopN to reset this
feature.
Note:
RYou can save the previous page layout setting
(feature #467 on page 54).
For quick ID copy feature
Original document Page layout
“2 in 1” “LANDSCAPE”
“PORTRAIT”
“4 in 1”“LANDSCAPE”
“PORTRAIT”
“8 in 1”“LANDSCAPE”
“PORTRAIT”
For image repeat feature
Original document Page layout
“2 in 1”
30
5. Copier