11.1 Report messages (KX-MB1520 only)
To indicate the unit’s fax transmission/reception status, one of the following messages will be printed on the
confirmation and journal reports (page 34).
Message Code Cause & Solution
COMMUNICATION ERROR 40-42
46-72
FF
RA transmission or reception error occurred. Try
again or check with the other party.
43
44
RA line problem occurred. Connect the telephone line
cord to a different jack and try again.
RAn overseas transmission error occurred. Try using
the overseas mode (feature #411 on page 50).
ERROR-NOT YOUR UNIT 53
54
59
70
RA transmission or reception error occurred because
of a problem with the other party’s fax machine.
Check with the other party.
JUNK FAX PROH. REJECT ----- RThe junk fax prohibitor feature of this unit rejected
fax reception.
MEMORY FULL ----- RThe memory is full of received documents due to a
lack of recording paper or a recording paper jam.
Load paper (page 13) or remove the jammed paper
(page 68).
RIf the PC fax setting (feature #442 on page 53) is set
to ALWAYS, check the connection between the
computer and the unit.
OTHER FAX NOT RESPONDING ----- RThe other party’s fax machine is busy or has run out
of recording paper. Try again.
RThe other party’s fax machine rings too many times.
Send the fax manually (page 34).
RThe other party’s machine is not a fax machine.
Check with the other party.
RThe number you dialed is not in service.
PRESSED THE ‘Stop’ KEY ----- R MStopN was pressed and fax communication was
canceled.
THE COVER WAS OPENED ----- RThe front cover was opened. Close it and try again.
OK ----- RFax transmission or reception was successful.
For assistance, please visit http://www.panasonic.com/help 59
11. . Help
11. Help