Making cellular calls
Available for:
KX-TG7641 series (page 3)
1Dial the phone number. a Press
MCELL 1N or MCELL 2N.
2When the other party answers,
speak into the microphone.
RSpeak alternately with the other
party.
3When you finish talking, press
MSP-PHONEN.
Note:
RFor best performance, use the
speakerphone in a quiet environment.
RWhile on a call, you can switch from
the base unit to the handset:
With the call sharing mode on
(page 33), press MCELLN on the
handset. a MbN: Select the desired
cellular phone. a MSELECTN a
Press MSP-PHONEN on the base unit.
– When only 1 cellular phone is
registered or the line is set to make
cellular calls (page 22), press
MCELLN on the handset, then press
MSP-PHONEN on the base unit.
If the handset is on the base unit,
simply lift it.
Adjusting the speaker volume
Press MDN or MCN repeatedly while talking.
Making a cellular call using the redial
list
The last 10 phone numbers dialed are
stored in the redial list (each 48 digits
max.).
1MN REDIAL
2MbN: Select the desired phone
number.
3Press MCELL 1N or MCELL 2N.
Erasing a number in the redial list
1M N REDIAL
2MbN: Select the desired phone
number. a MERASEN
3MbN: “Yes” a MN
4MnN (EXIT)
Making landline calls
1Dial the phone number. a
MSP-PHONEN
2When the other party answers,
speak into the microphone.
3When you finish talking, press
MSP-PHONEN.
Note:
RWhile on a call, you can switch from
the base unit to the handset:
Press MN on the handset, then
press MSP-PHONEN on the base unit
with the call sharing mode on
(page 33).
If the handset is on the base unit,
simply lift it.
Making a call using the redial list
1M N REDIAL
2MbN: Select the desired phone
number.
3MSP-PHONEN
Pause (for PBX/long distance service
users)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
phonebook, a pause is also needed
(page 38).
For assistance, please visit http://www.panasonic.com/help 31
Making/Answering Calls Using the Base Unit