Blocking incoming calls without
phone number
You can reject a call when no phone
number is provided, such as a call just
showing “Out of area”.
1MMENUN#240
2MbN: Select the desired setting. a
MSAVEN a MOFFN
Viewing/editing/erasing call block
numbers
1MMENUN#217
2MbN: Select the desired entry.
RTo exit, press MOFFN.
3To edit a number:
MEDITN a Edit the phone number.
a MSAVEN a MOFFN
To erase a number:
MERASEN a MbN: “Yes” a
MSELECTN a MOFFN
Note:
RWhen editing, press the desired dial
key to add, MCLEARN to erase.
RWhen viewing, “Block w/o num” is
displayed if the blocking incoming
calls without phone number feature is
turned on. To turn the feature off:
MERASEN a MCN a MSAVEN a
MOFFN
Registering a unit

Operating additional units

Additional handsets
Up to 6 handsets can be registered to
the base unit.
Important:
RSee page 5 for information on the
available model.

Registering a handset to the

base unit

The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base
unit, re-register the handset.
1Handset:
MMENUN#130
2Base unit:
Press and hold MLOCATORN for
about 5 seconds until the
registration tone sounds.
RIf all registered handsets start
ringing, press MLOCATORN again
to stop, then repeat this step.
RThe next step must be completed
within 90 seconds.
3Handset:
Press MOKN, then wait until a long
beep sounds.
Note:
RWhile registering, “Base in
registering” is displayed on all
registered handsets.
RWhen you purchase an additional
handset, refer to the additional
handset’s installation manual for
registration.
Deregistering a handset
A handset can cancel its own
registration to the base unit, or other
handsets registered to the same base
unit. This allows the handset to end its
wireless connection with the system.
1MMENUN#131
RAll handsets registered to the
base unit are displayed.
2MbN: Select the handset you want to
cancel. a MSELECTN
3MbN: “Yes” a MSELECTN
4MOFFN
48 For assistance, please visit http://www.panasonic.com/help
Programming