Search Functions

To Quickly Find the Beginning of a

Desired Programme

(VISS=VHS Index Search System)

This VCR automatically records special index signals on the tape every time a recording is started. The Index search function makes use of these index signals to let you find the beginning of a desired programme quickly and easily.

Index signals are automatically recorded in the following cases:

When you start a recording by pressing the REC button J, REC/OTR button d or DIRECT TV REC button 6.

When a timer recording starts.

When you press the REC button J on the remote control during recording.

Conditions for correct operation of the Index search function:

The VCR must be in the stop mode or in the playback mode.

Each programme recorded on the tape must be at least 5 minutes long.

Preparations

Display the VCR picture on the TV.

Insert a recorded video cassette.

As soon as the cassette is inserted, the Cassette Number Check starts. Wait a few moments until it is completed. (See page 15.)

Operation

1Press the INDEX button K (that corresponds to the direction from the current tape position in which the desired programme is located on the tape) to start the

index search. For example, if you want to search for the 2nd recorded programme in

forward direction, press the INDEX L button K twice.

The VCR fast-forwards or rewinds the tape and searches for the specified index signal (the beginning of the desired recorded programme).

When it has been found, playback starts automatically.

To Cancel the Index Search or to Stop Playback:

Press the Stop button 9.

Hints:

Searching in either direction is possible up to the 20th index signal.

If you press either of the INDEX buttons K too many times, simply press the other INDEX button K (indicating the opposite direction) to correct it. In this way, you can reduce the displayed figure down to 1.

The figure on the VCR display decreases by 1 every time an index signal is located.

To Search for a Desired Programme While Checking the Recorded Contents on a Cassette (Intro-Jet Scan)

This VCR automatically records special index signals on the tape every time a recording starts. The Intro-Jet Scan function makes use of these index signals to play back the beginning of each programme recorded on the cassette one after another at high speed.

This lets you quickly and easily check the contents of a cassette and find a desired programme.Index signals are automatically recorded in the following cases:

When you start a recording by pressing the REC button J, REC/OTR button d or DIRECT TV REC button 6.

When a timer recording starts.

When you press the REC button J on the remote control during recording.

Conditions for correct operation of the Intro-Jet Scan function:

The cassette must have been ejected after the timer recordings were performed.

VCR must be switched on, be in the playback mode or be in the standby mode.

Each programme recorded on the tape must be at least 15 minutes long.

Preparations

Display the VCR picture on the TV.

Insert a recorded video cassette.

Operations

1Insert a pre-recorded video cassette.

If a cassette is already in the VCR, press the LIBRARY button M.

¡As soon as the cassette is inserted, the Cassette Number Check starts. Wait a few moments until it is completed. (See page 15.)

If the “Intro-Jet Scan” indication does not appear on the TV screen, press the LIBRARY button M to make it appear.

 

Content of tape: 100

 

 

 

 

 

Content of tape: ---

 

Title

Date/Category

 

 

Title

 

Date/Category

 

 

 

 

 

 

 

 

 

 

 

 

 

ZDF (18:58)

We 19.04.98

 

 

 

 

>> Intro-Jet Scan <<

 

 

 

 

 

 

 

 

 

>>Find space to record <<

 

>> Intro-Jet Scan <<

or

 

 

 

 

 

 

 

 

 

: Subtitles

 

: Subtitles

2Press the Cursor buttons (34) R to select the “Intro-Jet Scan” indication and then press the LIBRARY button M to start the Intro-Jet Scan.

After rewinding the tape to the beginning, the VCR plays it back at high speed for approximately 10 seconds. It then fast-forwards the tape to the next tape position marked by an index signal (beginning of a programme), and every time an index signal is found, the VCR switches over to high-speed playback (Cue) for about 10 seconds.

 

 

Beginning of tape

 

 

 

 

Present tape position

 

 

 

 

 

 

 

 

Index signal

 

 

Programme 2

 

Programme 3

 

 

 

 

 

Programme 1

 

 

 

 

 

Rewinding

 

 

 

 

 

High-speed Playback

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fast-forwarding

 

 

(Cue)

 

 

 

 

 

 

3When you have found the programme that you want to view, press the Play button I to start normal playback.

To Cancel the Intro-Jet Scan or to Stop Playback:

Press the Stop button 9.

32

Page 32
Image 32
Panasonic NV-FJ760 manual Search Functions, To Cancel the Index Search or to Stop Playback, Operations