Panasonic NV-FJ760 manual VCR Operation

VCR Operation

When you want to operate the VCR, set the VCR/TV switch P to “VCR”.

°2 Numeric buttons

To select the programme positions (1–99) of the VCR. Example:

9:9

19: 1 9

To select the satellite programme positions

Example:

SAT 9:	SAT	SAT
	0	0	9

SAT

SAT19: 0 1 9

SAT

SAT129: 0 1 2 9

≥3-digit programme positions can be selected with this remote control only in case of a satellite receiver that is marked with (°1) on the enclosed list of compatible satellite receivers.

To enter a ShowView number.

To enter numbers for various settings.

°A VCR 1/2 switch

Set to the “VCR 2” position when using two Panasonic VCRs. (See page 54.)

°O SUBTITLE button

When receiving or playing back recordings of TV programmes that are broadcast with subtitles via Teletext, and also when playing back pre-recorded cassettes with “Closed Caption” subtitles, you can make the subtitles appear or disappear on the TV screen by pressing this button.

≥Every time you press this button, the “<:ON” indication or “<:OFF” indication appears on the TV screen for a few seconds. When you press this button to display the “<:ON” indication, the subtitles are displayed on the TV screen.

≥After pressing this button so that the “<:ON” indication appears, it may take a few moments until the subtitles are displayed on the TV screen.

≥Pressing this button also changes the setting of “Subtitles” for “Display” on the Main menuaccordingly. Therefore, turning the subtitle function on or off is also possible by changing the above setting on the Main menu. (See page 52.)

°Q Infra-red transmitter

°V Child Lock Function buttons

(Convenient function to prevent unauthorized use)

This function deactivates all buttons on the VCR and the remote control. Use this function, when you do not want other people to operate the VCR.

To Activate the Child Lock Function:

1Hold down the OK and the OFF (i) buttons V simultaneously until the “!" hold” indication appears in the VCR display.

≥ If you press a button while the Child Lock function is

on, the “!" hold” indication appears in the VCR display to inform you that no operation is possible.

To Cancel the Child Lock Function:

1Hold down the OK and the OFF (i) buttons V simultaneously until the “!" hold” indication disappears.

≥If you disconnect the power cable, the Child Lock function is automatically cancelled after the power backup time of approximately 60 minutes has elapsed.

≥If you cannot cancel the Child Lock function, press the EXIT button S and perform the operation step 1.

°\ Cassette compartment

°a Infra-red Remote Control Receiver window

°c VCR display

4