Panasonic NV-FJ760 manual Setting the VCR’s Clock, To Manually Adjust the Clock

Setting the VCR’s Clock

Usually, the VCR’s Auto Setup or Download function automatically adjusts the clock to the correct time.

Under some reception conditions, however, the VCR cannot set the clock automatically.

In this case, follow the operation steps below to manually set the clock.

To Manually Adjust the Clock

1Press the MENU button U to display the Main menu on the TV screen.

2	Press the Cursor buttons (34)	Main menu
		Timer record
	R to select “Clock”.	Tape Library	Automatic:		OFF
		Display
	≥ The Clock setting menu	Tuning
			Time	:	20:30:24
		Clock
	appears on the TV.	Functions	Date	:	16.10.05
		Country
		Language
		Satellite

3Use the Cursor button (1) R to move to the Clock setting menu, confirm that “Automatic” is set to “OFF”, and then press the OK button T.

To Activate the Automatic Time Correction Function

If a TV station transmits a signal for time setting, performing the operation steps below activates the Automatic time correction function and the time is corrected automatically.

1 Press the MENU button U to display the Main menu on
the TV screen.
2 Press the Cursor buttons (34) R to select “Clock”.
≥ The Clock setting menu
appears on the TV.
3 Use the Cursor button (1)	Main menu
	Timer record
	Tape Library
R to move to the Clock	Display	Automatic:		ON
	Tuning
setting menu, and then use	Clock	Time	:	20:30:24
	Functions	Date	:	16.10.05
	Language
the Cursor buttons (34) R
	Country
	Satellite
to set “Automatic” to “ON”.
4 Press the OK button T to conclude the setting.
≥ Under adverse reception conditions, etc., the
Automatic time correction function may not work. In

4Use the Cursor buttons

(3421) R to set the date and time.

≥Instead of the Cursor buttons

(3421) R, you can also use the numeric buttons 2 to set the date and time. (Set the VCR/TV switch P to “VCR”.)

Main menu
Timer record
Tape Library	Automatic:		OFF
Display
Tuning
Clock	Time	:	20:		:24
				30
Functions	Date	:	16.10.05
Language
Country
Satellite

	this case, the indication for “Automatic” is automatically
	reset to “OFF”.
	If the reception conditions improve later on, it may be
	possible to activate this function.
5	Press the EXIT button S to exit the On Screen Display.

5Press the OK button T to conclude the setting.

6Press the EXIT button S to exit the On Screen Display.

Hints:

≥If “Automatic” is set to “ON” when you open the Clock screen, do not set it to “OFF”, otherwise, the automatic time correcting function is deactivated.

≥The built-in clock employs the 24-hour system.

≥In case of a power failure, an automatic back-up system automatically maintains the operation of the clock for at least 60 minutes.

≥When “Automatic” on the Clock setting menu is set to “ON”, the automatic time correction function checks and if necessary adjusts the time several times every day.

The automatic time correction function only works when the VCR is switched off; it does not work in the timer recording standby mode.

≥If “Automatic” is set to “OFF” and “Power save” to “ON” (see page 52), the time may not be maintained correctly. In this case, manually adjust the clock.

≥If “Automatic” is set to “ON” and “Power save” to “ON”, the Automatic time correction function does not work while the VCR is turned off. However, as soon as it is turned on, the Automatic time correction function is activated and the clock is set correctly.

50