Record mode

Record mode

Check before recording

Check the following before recording important events such as weddings or when the movie camera has not been used for a long time. Conduct a test recording to make sure that the image recording and the audio recording work properly.

ªBasic camera holding

1)

2)

4)

3)

5)

1)Hold the camera with both hands.

2)Run your hand through the grip belt.

3)Do not cover the microphones or sensors with your hands.

4)Keep your arms near your body.

5)Slightly open your legs.

When you are in the open air, record pictures with the sunlight as far in the background as possible. If the subject is backlit, it will become dark in the recording.

ªCheck points

Grip belt adjustment (-8-)

Open the LCD monitor or extend the viewfinder (Recording cannot start while the LCD monitor is closed and the viewfinder is retracted. Even if the LCD monitor and viewfinder are closed during recording, the power will not turn off until recording stops.)

Adjustment of LCD monitor/viewfinder (-19-) Power supply (-9-)

Insert a cassette (-15-) Setting date/time (-13-) Setting SP/LP mode

20

ªAbout auto mode

Press the [AUTO] button and the colour balance (white balance) and focusing will be adjusted automatically.

(The [ AUTO ] indication appears on the screen.) Auto white balance: -49-

Auto focusing: -49-

Depending on the brightness of the subject etc., the aperature and shutter speed are automatically adjusted for an optimum brightness. (The shutter speed is adjusted to a maximum of 1/250.)

Colour balance and focus may not be adjusted depending on light sources or scenes. If so, manually adjust the white balance and focus.

MANUAL

AF/MF

Scene mode setting (-28-) White balance setting (-29-)

Shutter speed setting (-31-) Iris/gain value setting (-31-) Focus setting (-30-)

ªRecording mode

You can switch the tape recording mode. Set to Tape Recording Mode.

1Set [BASIC] >> [REC SPEED] >> [SP] or

[LP].

If the LP mode is selected, the recording time will be 1.5 times the SP mode, but some functions will be disabled.

We recommend using the SP mode for important recording.

In order to fully exhibit the performances of the LP mode, we recommend using Panasonic cassettes marked LP mode.

In the LP mode, the picture quality will not be degraded in comparison with the SP mode, but mosaic noise may appear on the playback image or some functions may be disabled.

Playback on other digital video equipment or on digital video equipment without the LP mode.

Playback of the image on other digital video equipment recorded in the LP mode.

Frame-by-frame playback.

LSQT1291

Page 20
Image 20
Panasonic NV-GS90 operating instructions Record mode, Check before recording