Record mode
Recording on a tape
When recording, open the lens cover before turning the unit on.
When this unit is purchased, the aspect ratio is set to [16:9] for recording images compatible with
a
[REC ASPECT] setting before recording the images
≥Set to Tape Recording Mode.
1Press the recording start/stop button to start recording.
2Press the recording start/stop button again to pause recording.
;
≥For the recording time on a tape, refer to
image is recorded properly.
≥In order to find the unrecorded section, carry out the blank search
ªOn-screen display in the tape recording mode
|
| 1) | |
|
|
|
|
0h00m10s00f |
| 2) | |
R 0:30 |
|
| |
| |||
R 0:30 |
|
|
|
|
|
|
|
1)Recording time elapse
2)Remaining tape indication
ªConcerning the remaining tape time
indication on the screen
≥The remaining tape time is indicated in minutes. (When it reaches less than 3 minutes, the indication starts flashing.)
≥During a 15 seconds or shorter recording, the remaining tape time indication may not be displayed or the remaining tape time may not be displayed correctly.
≥In some cases, the remaining tape time indication may display remaining tape time that is 2 to 3 minutes shorter than the actual remaining tape time.
Recording check
The last image recorded is played back for 2 to
3 seconds. After checking, the camera will be set to a recording pause.
≥Set to Tape Recording Mode.
1Press the joystick to display the icon during the recording pause. Move the joystick down until icon 1 appears.
2Move the joystick left to select the recording check icon [ 
].
1
≥The [RECORDING CHECK STARTED] indication appears on the screen of the movie camera.
21
LSQT1291
