Before using
12
LSQT1291
ªHow to turn off the power
1Set the mode dial to OFF.
≥The status indicator goes off when the power
turns off.
ªHow to turn the power on and off with
the LCD monitor/viewfinder
When the mode dial is set to Tape Recording
Mode, the power can be turned on and off with
the LCD monitor and the viewfinder.
1Open the LCD monitor out or extend the
viewfinder to turn on the power. (-13-,-14-)
≥The LCD monitor or the viewfinder will be
activated.
2Close the LCD monitor and retract the
viewfinder to turn off the power.
≥The power will not turn off unless the LCD
monitor is closed and the viewfinder is
retracted.
≥The status indicator automatically goes off
and the power turns off. (If quick start is set to
[ON] (-14-), the unit goes into quick start
standby mode and the status indicator lights
green.)
≥The power does not turn off even if the
LCD monitor is closed and the viewfinder
is retracted while recording on a tape.
3Open the LCD monitor or extend the
viewfinder to turn the power on and use the
movie camera again.
≥The status indicator lights red and the power
turns on.
TAPE RECORDING MODE
Use this when you record the
image on a tape.
TAPE PLAYBACK MODE
Use this to play back a tape.
OFF The power turns off.
Set the mode dial to OFF when this unit is not
being used.
LSQT1291_ENG.book 12 ページ ２００８年３月５日　水曜日　午前９時４１分