JVC HR-DD840U manual VCR Plus+ Timer Programming, EN Timer Recording, GUIDE. The MENU, REW

42ENTIMERRECORDING

VCR Plus+

Timer

Programming

●Before VCR Plus+ Timer programming, see "VCR Plus+ Setup" on page 18.

●Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

q

	1	2	3
NUMBER	4	5	6
	7	8	9
CANCEL		0

OK

MENU

ILLUMI GUIDE

When Using The Illumi-Guide Feature

●Buttons light or blink on the remote control for approximately 10 seconds. If the button or buttons extinguish during timer programming, press ILLUMI GUIDE and the button or buttons previously lit or blinking come back on. If the button or buttons do not re-light or start blinking again, press MENU as many times as necessary to return to the normal screen and extinguish all illuminated buttons, and re-perform the timer programming procedure from the beginning.

●If for some reason the remote control's signal is not received by the VCR, press MENU as many times as necessary to return to the normal screen and extinguish all illuminated buttons, and re-perform the timer programming procedure from the beginning.

Timer recording allows you to program the VCR to automati- cally record a program which will be broadcast at some future time.

The timer record function can be programmed using VCR Plus+ or On-Screen Timer Programming. (☞ pg. 42 or 44)

During VCR Plus+ and on-screen programming, the Illumi- Guide feature tells you which button on the remote control must be pressed next by lighting the relevant buttons. The Illumi-Guide feature is activated by the ILLUMI GUIDE button on the remote control. The Illumi-Guide feature is only active when the remote control's TV/CABLE/DBS/VCR switch is set to "VCR". (Illumi-Guide is an optional help feature which makes programming easier. It is not necessary to use Illumi-Guide to program the VCR.)

1		LOAD A CASSETTE
		Make sure the record safety tab is present.
		● The VCR’s power comes on automatically.
2		ACCESS VCR PLUS+ SCREEN
		To use the Illumi-Guide		VCR PLUS+
		feature press ILLUMI
		GUIDE. The MENU, REW,
		PLAY and FF buttons will
		light.
		Press MENU on the remote
		control.
			PRESS NUMBER KEY (0-9)
		● The clock must be set in	PRESS (MENU) TO MAIN MENU
		order to access the VCR
		Plus+ screen. If you haven’t set the clock, the Main
		Menu screen appears when you press MENU. Refer
		to page 7 for the Plug & Play procedure or page 9 for
		the clock setting procedure.
		● If you are using the Illumi-Guide feature, the following
		buttons will light up: NUMBER keys (0 – 9), CANCEL
		and MENU.
3		ENTER PLUSCODE NUMBER
		Press the appropriate NUMBER keys to enter the
		PlusCode number printed in the TV listings for the TV
		program you wish to record.
		● To make corrections, press CANCEL and input the
		correct PlusCode number.
		● If the PlusCode number you input is incorrect,
		"ERROR" may appear on the screen to advise you of
		the error. This happens when the PlusCode number is
		for a program which has already passed. "ERROR" is
		displayed for about 4 seconds and the VCR Plus+
		screen reappears (step 2).
	● If you are using the Illumi-Guide feature, OK blinks
		when the following buttons are lit: NUMBER keys
		(0 – 9), CANCEL and MENU.