Skip Over Unwanted Sections, TimeScan, Skip Search

EN37

TimeScan

Names of special-effects playback

Speed

Audio output

Reverse

Forward

Play

Slow-Motion

*Still

Slow-Motion

Play

-7x

-5x

-3x

-1x

-1/6x

-1/18x

1/18x

1/6x

Audio is output.

Audio is

Audio is not

Audio is output.

not output.

output.

* Still mode cannot be engaged using the remote control's TIME SCAN button.

●The speed is shown in the upper right corner of the TV screen for approx. 5 seconds.

●The TimeScan search speed is the same for SP and EP recordings.

●To resume normal playback, press PLAY.

●The playback speed may not change correctly if the VCR's TIME SCAN SHUTTLE ring is turned too quickly.

●When using the VCR's TIME SCAN SHUTTLE ring, the playback speed will change up to 7x and -7x search speeds. Turning the TIME SCAN SHUTTLE ring further will not increase the search speed.

●Picture may be distorted at the position where the recording speed is switched.

●The picture may be noisy for a moment when you change the playback speed.

●During high-speed search with a tape containing both SP and EP recordings, the search speed will change automatically to 7x normal playback speed with TimeScan when the recording tape speed switches from EP to SP.

●Depending on the tape in use, noise may appear or the upper part of the picture may be distorted.

●Picture may appear distorted in comparison to normal playback.

●In TimeScan mode there will be a time lag between the video and the audio and noise may appear in the audio signal.

●TimeScan sound quality will differ in comparison to normal playback.

●When material such as music videos where there is non-stop sound (very few breaks in the soundtrack) are viewed at 2x normal speed, the audio playback may be faster than normal.

●When the playback direction is reversed, it takes approximately 6 seconds until sound is heard.

If you don't want to hear TimeScan audio, set "TIMESCAN AUDIO" to "OFF" (☞ pg. 38).

1 2 3

7 8 9

Skip Search