6.4.2 Adding a new item into the broadcast

memory

1MPhonebookN
2Press MCN or MDN repeatedly to display the desired
broadcast memory location (<BROADCAST> or
<MANUAL BROAD>). A MMenuN A MGN
3Press MCN or MDN repeatedly to display the item you
want to add. A MSetN
RTo add other items, repeat this step (up to 20
items).
4MStopN
Note:
RWhen adding new items to the MANUAL
BROADCAST memory, you can only select stored
items.

6.4.3 Erasing a stored item from the

broadcast memory

1MPhonebookN
2Press MCN or MDN repeatedly to display the desired
broadcast memory location (<BROADCAST> or
<MANUAL BROAD>). A MMenuN A MBN
3Press MCN or MDN repeatedly to display the item you
want to erase.
RTo cancel erasing, press MStopN.
4MSetN A MSetN A MStopN

6.4.4 Sending the same document to

pre-programmed parties

To send the same document using the scanner glass
1. Set the original (page 19).
2. If necessary, change the resolution (page 41) and the
contrast (page 41).
3. Press MBroadcastN or MManual BroadN.
RTo send a single page, go to step 5.
RTo send multiple pages, go to the next step.
4. Place the next page. A MSetN
RTo send more pages, repeat this step.
5. MStartN
Note:
RTo stop sending, see page 72.
RIf you select FINE, SUPER FINE or PHOTO
resolution, the number of pages that the unit can
send will decrease.
RIf the document exceeds the memory capacity,
sending will be canceled.
RIf a party is busy or does not answer, it will be skipped
and redialed later 1 time.
RAfter transmission, the unit will automatically print a
report (broadcast sending report).
To send the same document using the automatic
document feeder
1. Set the original (page 20).
2. If necessary, change the resolution (page 41) and the
contrast (page 41).
3. Press MBroadcastN or MManual BroadN.
45
6. Fax (KX-MB2030 only)