9.4 Copy features
Feature/Code Selection
Setting the input tray to use
for copy
MBNM4NM6NM0N
M1N “#1” (default): The paper input tray is selected. The displayed paper size
depends on the recording paper size setting (feature #380 on page 57).
M2N “#2”: The manual input tray is selected. The displayed paper size depends
on the recording paper size setting (feature #381 on page 57).
Changing the default copy
resolution
MBNM4NM6NM1N
To change the default resolution setting for copying.
M1N “TEXT/PHOTO” (default): For documents containing both text and
photographs.
M2N “TEXT”: For documents containing only text.
M3N “PHOTO”: For documents containing photographs, shaded drawings, etc.
Holding the previous page
layout setting
MBNM4NM6NM7N
M0N “DISABLED” (default): Deactivates this feature.
M1N “ENABLED”: The unit will hold the previous setting.
Holding the previous zoom
setting
MBNM4NM6NM8N
M0N “DISABLED” (default): Deactivates this feature.
M1N “ENABLED”: The unit will hold the previous setting.
Holding the previous collate
setting
MBNM4NM6NM9N
M0N “DISABLED” (default): Deactivates this feature.
M1N “ENABLED”: The unit will hold the previous setting.
Holding the previous edge
setting
MBNM4NM7NM3N
M0N “DISABLED” (default): Deactivates this feature.
M1N “ENABLED”: The unit will hold the previous setting.
Setting the frame margin
MBNM4NM7NM4N
M0N “DISABLED” (default): Deactivates this feature.
M1N “ENABLED”: Your copies will be automatically reduced according to the
margin setting.
Holding the previous margin
setting
MBNM4NM7NM5N
M0N “DISABLED” (default): Deactivates this feature.
M1N “ENABLED”: The unit will hold the previous setting.
63
9. Programmable Features