6.1 Sending a fax manually

6.1.1 Using the scanner glass

By using the scanner glass, you can send a page from
booklets or small size paper.
MResolutionN
MContrastN
MRedialN
MFaxN
MStartNMSetN
MQuick ScanN
1If the MFaxN light is OFF, turn it ON by pressing
MFaxN.
2Set the original (page 19).
3If necessary, change the resolution and contrast
according to the type of document.
RTo select the resolution, see page 41.
RTo select the contrast, see page 41.
4Dial the fax number.
RTo send a single page, go to step 7.
RTo send multiple pages, go to the next step.
5Press MQuick ScanN to scan the document into
memory.
RWait until “SCAN:PRESS SET” “SEND:PRESS
START” is displayed.
6Place the next page on the scanner glass. A MSetN
RTo send more pages, repeat this step.
7MStartN
Note:
RTo stop sending, see page 72.
RYou can change the default operation mode (feature
#463 on page 58) and the timer before returning to
the default operation mode (feature #464 on
page 58).
To select the resolution
1. Press MResolutionN repeatedly.
–“STANDARD”: For normal-sized characters.
–“FINE”: For small-sized characters.
–“SUPER FINE”: For very small-sized characters.
–“PHOTO”: For photographs, shaded drawings,
etc.
2. MSetN
RUsing the “FINE”, “SUPER FINE” and “PHOTO”
settings will increase transmission time.
To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
Press MContrastN repeatedly. A MSetN
Note:
RYou can save the previous contrast setting (feature
#462 on page 58).
To redial the last number
MRedialN
RIf the line is busy, the unit will automatically redial the
number 1 time.
Note:
RTo stop sending, see page 72.
Reserving the fax transmission (Dual Access)
You can reserve a fax transmission even when the unit
is just receiving a fax or sending a fax from memory.
– Up to 3 reservations when sending
– Up to 4 reservations when receiving
1. Set the original during fax reception or fax memory
transmission.
2. Enter the fax number using the dial keypad,
one-touch dial or phonebook.
3. When using the scanner glass, press MQuick
ScanN. The unit will scan 1 page. Place the next
document on the scanner glass and press MSetN.
Repeat this until all the documents are scanned, then
press MStartN.
When using the automatic document feeder,
press MStartN.
RIf the document exceeds the memory capacity, the
reservation for that document will be canceled. You
must send the entire document manually.
Printing a confirmation report
A confirmation report provides you with a printed record
of transmission results. To print the confirmation reports,
make sure that feature #401 is activated (page 59). For
an explanation of the messages, see page 73.
Printing a journal report
A journal report provides you with a printed record of the
30 most recent faxes. To print it manually, see
page 96. To print it automatically after every 30 new
41
6. . Fax (KX-MB2030 only)
6. Fax (KX-MB2030 only)