2.4 Selecting the operation mode(Scan/Copy) (Fax: KX-MB2030
only)
You can select the desired mode by pressing one of the
following buttons.
KX-MB2000
KX-MB2010
KX-MB2030
–MScanN: Select this mode when using the unit as a
scanner (page 30).
–MCopyN: Select this mode when using the unit as a
copier (page 34).
–MFaxN (KX-MB2030 only): Select this mode when
using the unit as a fax machine (page 41).
Note:
RThe default operation mode is the copy mode.
RYou can change the default operation mode (feature
#463 on page 58) and the timer before returning to
the default operation mode (feature #464 on
page 58) (KX-MB2030 only).
2.5 Setting the original

2.5.1 Using the scanner glass

A
B
1Open the document cover (A).
2Place the document FACE DOWN on the scanner
glass (B), aligning the top left of the document with
the corner where the mark is positioned.
3Close the document cover.
Note:
RConfirm that there are no documents in the automatic
document feeder (KX-MB2010/KX-MB2030 only).
RPlace the original onto the scanner glass gently. To
avoid malfunction, do not press down too firmly.
RIf the original is a thick book, do not close the
document cover.
RConfirm that any ink, paste or correction fluid has
dried completely.
REffective scanning area is shown by the shaded area:
Effective scanning area
208 mm
(8 3/16")
289
mm
(11 3/8")
4 mm
(5/32")
4 mm
(5/32")
4 mm
(5/32")
4 mm
(5/32")
For assistance, please visit http://www.panasonic.com/help 19
2. Preparation