Problem Cause & Solution
The [Windows Security Alert]
dialog box appears and asks
if I want to block
[PCCMFLPD] and I cannot
operate the following
functions after installing the
Microsoft Windows XP
Service Pack 2 or later.
–PC printing
–Scanning
–Remote Control
–PC FAX (KX-MB2030 only)
–Device Monitor
RClick [Keep Blocking] and run the Windows Firewall Setting Tool to allow
the data transmission for Multi-Function Station (page 83).
11.3.7 Using an answering machine (KX-MB2030 only)
Problem Cause & Solution
I cannot receive documents
automatically.
RYour greeting message on the answering machine is too long. Shorten the
message. Record a message less than 10 seconds long.
RThe answering machine rings too many times. Set to 1 or 2 rings.
I cannot receive voice
messages.
RCheck if the answering machine is turned ON and connected to the unit
properly (page 47).
RSet the number of rings on the answering machine to 1 or 2.
I pressed the remote access
code to access the answering
machine remotely, but the line
was disconnected.
RThe code may include “#” which is used for certain features provided by
telephone companies. Change the code on the answering machine to
another number which does not include “#”.
Callers complain that they
cannot send a document.
RThere is no room left in the memory of your answering machine to record
voice messages. See the operating instructions of the answering machine
and erase unnecessary messages.
RYou set the answering machine to only give a greeting message.
11.3.8 If a power failure occurs
RThe unit will not function.
RIf any documents are stored in the memory (i.e. during copying, PC printing), they will be lost.
KX-MB2030 only:
RThe unit is not designed for making emergency telephone calls when the power fails. Alternative arrangements
should be made for access to emergency services.
RFax transmission and reception will be interrupted.
RDocuments during fax transmission or fax reception will be lost.
RWhen power is restored, a power down report will be printed out stating which fax items in the memory have been
erased.
11.3.9 Firewall setting tool for Microsoft Windows XP Service Pack 2 or later/Windows Vista/Windows 7 users (LAN connection only)
After installing Microsoft Windows XP Service Pack 2 or later/Windows Vista/Windows 7, you will not be able to use
the following functions because the Windows Firewall feature will be activated and block the connection.
– Device Monitor
– LPD Manager (Network communication tool)
The Windows Firewall Setting Tool enables you to change the Windows Firewall security settings and to use the
above functions properly.
For assistance, please visit http://www.panasonic.com/help 83
11. Help