2. MScanN
3. Using station 1-3:
Press the desired station key.
Using station 4-6:
Press MLowerN, then press the desired station
key.
4. MSetN A MStartN
4.1.6 Scan to FTP server (LAN connection
only)
You can send the scanned image to a folder on an FTP
server.
Important:
RProgram the FTP server settings beforehand
(page 66).
1Set the original (page 19).
2MScanN
3Press MCN or MDN repeatedly to select FTP
SERVER. A MSetN
4Press MCN or MDN repeatedly to select the destination
to which you want to send the scanned image. A
MSetN
5If necessary, change the scanning settings. Press
MEN, press MCN or MDN repeatedly to select the desired
setting. A MSetN
6MStartN
RThe scanned image will be automatically saved
in the selected folder on the FTP server.
Note:
RTo stop scanning, see page 72.
RYou can save the images in TIFF, JPEG or PDF
formats.
RTo display the scanned image, download the data to
your computer beforehand.
4.1.7 Scan to SMB folder (LAN connection
only)
You can send the scanned image to a folder on the
network.
Important:
RProgram the SMB folder settings beforehand
(page 66).
1Set the original (page 19).
2MScanN
3Press MCN or MDN repeatedly to select SMB
FOLDER. A MSetN
4Press MCN or MDN repeatedly to select the folder to
which you want to send the scanned image. A
MSetN
5If necessary, change the scanning settings. Press
MEN, press MCN or MDN repeatedly to select the desired
setting. A MSetN
6MStartN
RThe scanned image will be automatically saved
in the selected folder on the network.
Note:
RTo stop scanning, see page 72.
RYou can save the images in TIFF, JPEG or PDF
formats.
RIf this function does not perform properly, consult
your network administrator. This unit’s SMB function
does not support NTMLv2 and SMB signatures.
32
4. Scanner