9.3 Fax features (KX-MB2030 only)Feature/Code Selection
Erasing all items stored for
the one-touch dial and
phonebook
MBNM2NM8NM9N
M0N “NO” (default)
M1N “YES”
RDisconnect the telephone line cord, USB cable and LAN cable before
activating this feature.
To erase all items:
1. MMenuN A MBNM2NM8NM9N
2. Press M1N to select “YES”. A MSetN
3. Press M1N to select “YES”. A MSetN A MMenuN
Printing a confirmation
report
MBNM4NM0NM1N
M0N “OFF”: Confirmation reports will not be printed.
M1N “ON”: A confirmation report will be printed after every fax transmission.
M2N “ERROR” (default): A confirmation report will be printed only when fax
transmission fails.
Setting the journal report to
print automatically
MBNM4NM0NM2N
M0N “OFF”: The unit will not print a journal report, but will keep a record of the
last 30 fax transmissions and receptions.
M1N “ON” (default): The unit will print a journal report automatically after every
30 new fax transmissions and receptions (page 41).
Sending documents
overseas
MBNM4NM1NM1N
If you cannot send a fax overseas even if the number is correct and the line is
connected, activate this feature before sending the fax.
This feature improves the reliability by reducing the transmission speed.
M0N “OFF”: Deactivates this feature.
M1N “NEXT FAX”: This setting is effective only for the next attempted fax
transmission. After transmission, the unit will return to the previous setting.
M2N “ERROR” (default): When the previous fax transmission fails and you wish
to re-send the document.
Note:
RThis feature is not available for broadcast transmission.
RCalling charges may be higher than usual.
59
9. Programmable Features