fax transmissions and receptions, make sure feature
#402 is activated (page 59). For an explanation of the
messages, see page 73.

6.1.2 Using the automatic document feeder

MFaxN
MQuick ScanN
MMonitorNMStartN
1If the MFaxN light is OFF, turn it ON by pressing
MFaxN.
2Set the original (page 20).
3If necessary, change the resolution and contrast
according to the type of document.
RTo select the resolution, see page 41.
RTo select the contrast, see page 41.
4MMonitorN
5Dial the fax number. A MStartN
Note:
RTo stop sending, see page 72.
RDo not open the document cover when sending a fax
with the automatic document feeder.
Pre-dialing a fax number
1. Enter the fax number.
2. Set the original (page 20). A MStartN
Sending from memory (Quick scan feature)
1. Set the original (page 20).
2. Enter the fax number. A MQuick ScanN
6.2 Storing items for theone-touch dial feature andphonebook
The unit provides the one-touch dial feature (6 items) and
phonebook (100 items).
RStation 1 and 2 can be used alternatively as
broadcast keys (page 44).
RMake sure that the MFaxN light is ON.
MCNMDNMENMSetNMFaxN
MStopNMPhonebookN
MLowerN
Station keys MMenuN

6.2.1 Storing one-touch dial item

1Press MMenuN repeatedly to display PHONEBOOK
SET.
2Select the desired station key.
For station 1-2:
1. Press one of the station keys.
2. Press MCN or MDN repeatedly to select DIAL
MODE. A MSetN
For station 3:
Press the station key.
For station 4-6:
Press MLowerN, then press one of the station keys.
3Enter the name, up to 16 characters (see page 71
for character entry). A MSetN
4Enter the telephone number, up to 32 digits. A
MSetN
RTo program other items, repeat steps 2 to 4.
5MStopN
Note:
RA hyphen or a space entered in a telephone number
counts as 2 digits.

6.2.2 Storing phonebook items

1Press MMenuN repeatedly to display PHONEBOOK
SET. A MEN
2Enter the name, up to 16 characters (see page 71
for character entry). A MSetN
3Enter the telephone number, up to 32 digits. A
MSetN
RTo program other items, repeat steps 2 to 3.
42
6. Fax (KX-MB2030 only)