Panasonic PT-L735NTE Contrast, Bright, Color, Tint, Sharpness, White Balance R/G/B, Tv-System

CONTRAST

This adjusts the contrast of the picture. Press the H button to make the picture brighter, and press the

Ibutton to make the picture darker. (Adjust the BRIGHT setting first if required before adjusting the CONTRAST setting.)

BRIGHT

This adjusts the darker areas (black areas) in the picture. Press the H button if dark areas are too solid (for example, if hair is difficult to see), and press the I button if black areas are too light (grey rather than black).

COLOR

(S-VIDEO/VIDEO/YPBPRonly) Press the H button to make the colour more vivid in tone, and press the I button to make the colour more pastel in tone.

TINT

(NTSC/NTSC 4.43/YPBPR only) This adjusts the flesh tones in the picture. Press the H button to make flesh tones more greenish, and press the I button to make the flesh tones more reddish.

SHARPNESS

Press the H button to make the picture details sharper, and press the I button to make the picture details softer.

Colour Hue Setting (COLOR TEMP.)

STANDARD

HIGH

LOW

This is used to adjust the white areas of the picture if they appear bluish or reddish.

Noise Reduction (NR)

(When S-VIDEO/VIDEO/YPBPRsignals are being input)

If the signal is of such poor quality that picture interference appears, you can suppress this interference by adjusting the NR (Noise Reduction). To strengthen the effect, press the H button. To turn it off , set to “0” by pressing the I button.

WHITE BALANCE R/G/B

(RGB only)

This is used to adjust the white areas of the picture if they appear colourised. Press the I button to make the selected colour lighter. Press the H button to make the selected colour stronger.

TV-SYSTEM

(S-VIDEO/VIDEO only)

AUTO1

AUTO2

NTSC

NTSC4.43

PAL

PAL-M

PAL-N

SECAM

AUTO1

The projector automatically distinguishes between NTSC/NTSC 4.43/PAL/PAL60/SECAM signals.

AUTO2

The projector automatically distinguishes between NTSC/PAL- M/PAL-N signals.

NOTE:

BThis should normally be set to “AUTO1” or “AUTO2”. If the signal is of such poor quality that the correct format cannot be automatically distinguished, change the setting manually to the required TV system.

Projecting sRGB- compatible pictures

sRGB is an international colour reproduction standard (IEC61966-2-

1)established by the International Electrotechnical Commission (IEC). If you would like the colours in sRGB-compatible pictures to be reproduced more faithfully, make the following settings.

#Press the F or G button to select “PICTURE MODE”, and then use the I or H button to select “NATURAL”.

$Press the F or G button to select “COLOR TEMP.”, and then use the I or H button to select “STANDARD”.

%Press the STD (standard) button on the remote control unit.

&Select the LAMP POWER item in the OPTION menu by pressing the F or G buttons and set to “HIGH” by pressing the I or H buttons.

NOTE:

BsRGB is only enabled when RGB signals are being input .

Adjustments and settings

38-ENGLISH ENGLISH-39