Panasonic SDR-H50 ∫ Screen indications, Audio recording modes, Select the menu. l24

∫Screen indications

A

B SP 0h00m10s

R 12h45m

C

D

ARecording mode

BSelected recording destination C Remaining time left for recording

When the remaining time is less than

1minute, [R 0h00m] flashes red.

D Recording time elapsed

Each time the unit enters the recording pause mode, the counter display will be reset to “0h00m00s”.

≥While motion picture recording is in progress, the recording will not stop even if the LCD monitor is closed.

≥While motion picture recording is in progress, do not disconnect the AC adaptor or remove the battery. If you do, a repair message may be displayed when the power is turned back on. (l 96, About recovery)

32

Audio recording modes

[SD]

This mode switches the method for recording audio to an SD card.

¬Select [SD CARD] in [MEDIA SELECT].

Select the menu. (l24)

[SETUP] # [AUDIO REC] # [DOLBY] or [MPEG]

[DOLBY] (Dolby AC-3):

This is a recording method suitable for copying motion pictures recorded on an SD card to a DVD disc by connecting the unit to a DVD burner.

[MPEG] (MPEG-1 Audio Layer 2):

This is a recording method suitable for playing back audio using a device conforming to the SD- Video standard.

≥This unit is not capable of converting the audio recording method after recording motion pictures.

By using the supplied software, audio can be recorded in [DOLBY] mode on a disc and in [MPEG] mode on an SD card.

≥This function’s default setting is [MPEG].

LSQT1346