Panasonic SDR-H50 Manual shutter speed/ aperture adjustment, Shutter Speed, Aperture

Manual shutter speed/ aperture adjustment

Shutter Speed:

Adjust it when recording fast-moving subjects.

Aperture:

Adjust it when the screen is too bright or too dark.

1 Select the manual mode. (l44)

2 Select [ ] or [ ] with the

joystick.

MNL

3/3NEXT

3 Adjust the settings with the joystick.

A	MNL
	1/100
B	OPEN

BACK

AShutter speed:

1/25 to 1/8000

1/25 to 1/500

≥The shutter speed closer to 1/8000 is faster.

≥If [AUTO SLW SHTR] is set to [OFF], the

slowest shutter speed is 1/50.

BIris/Gain value: SDR-H60

CLOSE # (F16 to F2.2) # OPEN # (0dB to 18dB)

SDR-H50/SDR-H40

CLOSE # (F16 to F2.0) # OPEN # (0dB to 18dB)

≥Value closer to [CLOSE] darkens the image.

≥Value closer to [18dB] brightens the image.

≥When the iris value is adjusted to brighter than [OPEN], it changes to the gain value.

48

To restore to automatic adjustment Press the AUTO button.

≥When setting both the shutter speed and the iris/gain value, set the shutter speed and then set the iris/gain value.

∫Manual shutter speed adjustment

≥ Avoid recording under fluorescent light, mercury light or sodium light because the colour and brightness of the playback image may change.

≥ If you increase the shutter speed manually, the noise on the screen may increase.

≥ You may see vertical lines of light in the playback image of a brightly shining subject or highly reflective subject, but this is not a malfunction.

≥ During normal playback, image movement may not look smooth.

≥ When recording in an extremely bright place, the screen may change colour or flicker. If so adjust the shutter speed manually to [1/50] or [1/100].

∫Manual iris/gain adjustment

≥If the gain value is increased, the noise on the screen increases.

≥Depending on the zoom magnification, there are iris values that are not displayed.

LSQT1346