Panasonic SDR-H50 To set the white balance manually, Select with the joystick

To set the white balance manually

1 Select [ ] with the joystick, and fill the screen with a white subject.

MNL

BACKK

2 Select [ ] with the joystick.

MNL

BACK

When the [ ] display stops flashing, the setting is complete.

≥If the [ ] display continues flashing, the white balance cannot be set because it is too dark. In this case, use the automatic white balance.

∫White balance sensor A

A

The white balance sensor detects the type of light source during recording.

Do not cover the white balance sensor during recording, or it may not function properly.

≥When the unit is turned on with the lens cover closed, the automatic white balance adjustment may not function properly. Please turn the unit on after opening the lens cover.

≥When the [ ] display flashes, the manual white balance previously adjusted is stored. Whenever recording conditions change, re-set the white balance for correct adjustment.

≥When setting both the white balance and the iris/gain, set the white balance first.

47

LSQT1346