Panasonic SDR-H50 operating instructions Image stabilizer function, Press the O.I.S. button

scene being recorded has a light source different from the scene last recorded. (When the colour night view function is used, however, the white balance of the scene last recorded is retained.)

≥In the quick start mode, the zoom magnification becomes 2k and the picture size may differ from what it was before quick start standby mode.

≥If [POWER SAVE] (l 25) is set to

[5 MINUTES] and the unit automatically goes into quick start standby mode, close the LCD monitor and then open it again.

Image stabilizer function

Reduces the image shaking (jitter) due to hand movement when recording.

¬Rotate the mode dial to select or

.

Press the O.I.S. button.

O.I.S.

The image stabilizer icon [ ] appears.

To cancel the image stabilizer function Press the O.I.S. button again.

≥The default setting is on.

≥When a tripod is used, we recommend that you turn the image stabilizer off.

≥In the following cases, the image stabilizer function may not work effectively. jWhen the digital zoom is used jWhen the unit is shaken greatly jWhen you record a moving subject while

tracking it

38

LSQT1346