99
ANTENNA
Cable In
DIGITAL
AUDIO OUT
G-LINK
CableCARD
TM
ANTENNA
Cable In
PODMODULE
INSERT THISEND
The RF input mode must be set to Antenna
(see pages 19, 30).
Note:
Cables and connectors are not supplied with this set.
Mixer
UHFVHF
Back of the TV
75 Ohm Coaxial Cable (5C-2V or higher specification)
Antenna
Terminal
F-Type Antenna
Connector
or Incoming
Cable signal
Home antenna
CableCARDTM allows you to tune digital and high definition cable channels through the cable antenna.
Consult your cable company on the availability of CableCARDTM.
Notes:
• If you experience keyboard or remote control function hang-up when using CableCARDTM , unplug the TV and plug it
back on and try the controls again. If this condition persists, please call Panasonic Customer Call Center for further
instructions.
• Do not insert a PCMCIA card into CableCARDTM slot.
Back of the TV
Upper side of the card
1.Connect the cable antenna to ANT connector.
2.Turn the TV on (see page 15).
3.Set the input mode to TV (see page 16).
4.Insert the CableCARDTM (with upper side facing you) into CableCARDTM slot on the back of the TV.
Follow the messages displayed on the screen.
Connection
Procedure
Antenna Connection
CableCARDTM Connection