Screensaver (For preventing image retention)
Do not display a still picture, especially in 4:3 mode, for any length of time. If the display must remain on, a Screensaver should be used.
When the screen saver is operating, the following 5 patterns are displayed full screen for 5 seconds each.
Black Dark Gray Gray Light Gray White
1 Press to display the Setup menu.
2 | Press to select Screensaver. |
|
Press to display Screensaver screen.
|
|
|
| Setup | 1/2 |
|
|
|
| Signal |
|
| Screensaver |
|
| Input label |
|
| ECO Mode settings |
|
| Wobbling | Off |
|
| |
|
| RGB |
| No activity power off |
|
|
| Disable |
| OSD Language | English(UK) |
| ||
|
|
|
Screensaver
PRESENT TIME MON 0 : 02
Start
ModeOff
Press to select Mode.
Press to select each mode items.
Off
Interval : Operates when Periodic Time and Operating
Time are setup and those times arrive. Time Designation : Operates when Start Time and Finish Time are setup and those times arrive.
Standby after SCR Saver: Operates while Screensaver duration, and
|
| display enters standby mode. | ||
|
| |||
On | : Operates when Start is selected and the | |||
|
| ACTION ( |
| ) button is pressed. |
|
|
| ||
|
|
|
When the Mode is set to On, press to select Start.
Press to start Screensaver.
The menu screen will disappear and the Screensaver will be activated. To stop the
Screensaver under On, press the R button or any buttons on the main unit.Note: When the display is turned off, the Scrensaver will be deactivated.
29