Options Adjustments

Item

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Adjustments

 

 

Off

 

On

 

 

MENU&ENTER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Off: All the buttons on main unit can be used.

 

 

 

 

 

 

 

 

 

 

MENU

 

ENTER/

buttons on main unit.

 

 

 

MENU&ENTER: Locks

and

 

 

Button lock

On: Locks all the button on main unit except the Power switch.

 

Sets Button lock with the unit buttons in the following procedure.

ENTER/

 

Off: Press

four times

 

INPUT

four times

Press

 

 

Press

four times Press

 

 

 

 

 

 

 

ENTER/

 

Press

 

INPUT

ENTER/

 

MENU&ENTER: Press

four times

four times Press

four times Press

 

On: Press

four times

Press ENTER/ four times

Press

four times

Press ENTER/

 

Off

 

User1

 

 

User2

 

 

User3

 

 

 

 

 

 

 

 

 

 

 

 

Off:

You can use all of the buttons on the remote control.

 

Remocon User level

User1:You can only use

, , ,

,

 

 

 

 

 

buttons on the remote control.

 

User2:You can only use

button on the remote control.

 

 

 

User3:Locks all the buttons on remote control.

 

 

 

5V Charge

Sets the power supply from the CHARGE terminal.

 

 

(CHARGE terminal

On: Supplies power when the power of the display is on.

 

 

power supply

Off: Supplies no power.

 

 

 

 

 

 

 

 

 

 

 

 

 

setting)

Note: Power will not be supplied in standby mode even if “5V Charge” is set to “On”.

Enable: Enables the “Off-timer function”.

Off-timer function Disable: Disables the “Off-timer function”.

Note: When “Disable” is set, the Off-timer is cancelled.

Normal On Standby

Sets the power mode of the unit for when the power recovers from failure or after plugging off and in again.

Initial Power Mode Normal: Power returns in as the same state as before the power interruption. Standby: Power returns in standby mode. (Power Indicator : red/orange)

On: Power returns in power On. (Power Indicator : green)

Note: When using multiple displays, “Standby” is preferred to be set in order to reduce a power load.

ID select

Sets panel ID number when panel is used in “Remote ID” or “Serial ID”.

 

Set value range: 0 - 100

 

 

 

 

 

 

 

 

 

 

 

(Standard value: 0)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The setting of this menu is valid only when using ID remote control.

 

 

 

 

 

Off:

 

Disables ID remote control functions. You can use normal remote control operations.

 

Remote ID

On:

 

Enable ID remote control functions.

 

 

 

 

Note: To use the ID remote control function, it is necessary to set each ID number of remote control and

 

 

 

display unit. About the setting method, please refer to “ID Remote Control Function” (see page

 

 

36) and “ID select” (above-mentioned).

 

 

 

 

Serial ID

Sets the panel ID Control.

 

 

 

 

 

 

 

 

 

 

Off:

 

Disables external control by the ID.

 

 

 

 

 

On:

 

Enables the external control by the ID.

 

 

 

 

Studio W/B

Off:

 

Nullify all the settings adjusted.

 

 

 

 

On:

 

Sets the colour temperature for TV studio.

 

 

 

 

 

Note: Valid only when the “Warm” is set as “White balance” in Picture menu.

 

LAN Control

Select the LAN control protocol.

 

 

 

 

Protocol 1: Control with the Panasonic Display sequence.

 

 

 

 

Protocol

 

 

 

 

Protocol 2: Control with the sequence that compatible with Panasonic Projector.

 

 

 

RS-232C/LAN

Set up the informing manner if error warning occurred. (see page 46)

 

 

 

 

Information Timing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Off

 

1

 

2

 

 

3....

 

 

30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You can set the power-on delay time of the displays to reduce the power load, when you press

 

 

to

 

 

 

turn on the multiple displays that are set together, for example, on MULTI DISPLAY system.

 

Power ON Screen

Set each display’s setting individually.

 

 

 

 

Off:

 

 

 

The display will be turned on at the same time as

 

 

 

is pressed.

 

 

 

 

 

 

 

Delay

1 to 30 (sec.): Set the power-on delay time (second).

 

 

 

 

 

 

Notes:

 

After pressing

 

 

, the display will be powered on with time delay depending on this setting.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•During this function is working, the power indicator is blinking green.

•This function also works when the power recovers from failure or after plugging off and in again the power cord.

Power On Message

Whether to show/hide No activity power off Precautions at the time of power ON is set.

On:

The warning precautions are shown at the time of power ON.

(No activity power

Off:

The warning precautions are not shown at the time of power ON.

off)

Note:

 

This setting is enabled only if “No activity power off” is “Enable” (see page 31).

 

Off:

Not display the clock.

 

On:

Display the clock.

 

The clock is displayed at the lower left of the screen when button is pressed.

Clock Display

 

 

 

 

Note: When “PRESENT TIME Setup” is not set, the clock is not displayed even

 

 

 

 

 

 

 

 

 

if “Clock Display” is “On”. (see page 27)

 

 

 

 

 

 

 

 

 

10:00

 

 

 

 

 

 

 

 

44