Options Adjustments

Item

Adjustments

Set the functions that operates when is pressed.

Signal: The “SIGNAL” menu is displayed.

Screensaver: The “SCREENSAVER” menu is displayed.

ECO menu: The “ECO MODE SETTINGS” menu is displayed.

Set up TIMER: The “Set up TIMER” menu is displayed.

Note:

Factory settings are as follows.

FUNCTION1 button: Signal

FUNCTION2 button: Screensaver

Function button assign 1

Use the FUNCTION button

 

 

 

 

Function button assign 2

 

The menu screen is displayed. (Example: Signal)

 

 

 

 

 

 

 

Signal

[ Digital ]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cinema reality

Off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HDMI Range

Auto

 

H-Freq. 63.98 kHz

V-Freq. 60.02 Hz

Dot Clock Freq. 108.0 MHz

Signal Format 1280×1024/60

Press the FUNCTION button to exit from the menu.

Sets the lock setting for the display Power switch.

Power Switch Lock On: Power switch operation is disabled. Off: Power switch operation is enabled.

Note: This function is only for TH-42LFE7U, TH-50LFE7U, TH-65LFE7U.

Normalisation

When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote ID” adjustments, set all the values “Off” so that all the buttons are enabled again.

Press thebutton on main unit together with button on the remote control and hold for more than 5 seconds. The “Shipping” menu is displayed and the lock is released when it disappears.

Input Search

When a signal is not detected, another input with a signal is automatically selected.

 

 

 

 

 

 

 

 

 

 

 

 

Options

1/3

 

Press ACTION (

 

) button

 

Input Search

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Input Search

 

 

 

 

 

 

Input Search

Off

 

 

On screen display

On

 

 

 

 

 

Primary Input

 

 

 

 

 

 

 

 

 

 

Secondary Input

 

 

 

Initial input

Off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 select

2 adjust

Input Search

Off: When there is no signal, the input is not switched automatically.

All Inputs: Searches all inputs and switches to an input with a signal.

Priority: Searches “Primary Input” and “Secondary Input” in order and switches to an input with a signal.

Searching...

“Searching...” is displayed during the input search.

Primary Input, Secondary Input

Set the input to search when “Priority” is selected.

(NONE) PC DVI HDMI1 HDMI2 Note:

This menu is available only when “Input lock” is “Off”. (see page 43)

45