Panasonic Advanced settings, Picture Adjustments, Item, Item, Effect, Colour, Notes:, Effect, Notes:, Details, Contrast, W/B High, W/B High, W/B High, Backlight

Picture Adjustments

Item	Effect		Adjustments
Backlight			Adjusts luminance of the back
	Darker	Brighter	light.
Contrast*			Selects the proper brightness
	Less	More	and density for the room.
			Adjusts for easier viewing of
Brightness	Darker	Brighter	dark pictures such as night
			scenes and black hair.
Colour	Less	More	Adjusts colour saturation.
Sharpness	Less	More	Adjusts picture sharpness.

Notes:

•You can change the level of each function (Backlight, Contrast, Brightness, Sharpness) for each Picture Mode.

•The setting details for normal, dynamic and cinema respectively are memorized separately for each input terminal.

•“Backlight” can be adjusted when “ECO Mode” is set to “Custom” and “Power save” to “Off”. (see page 32)

* In “ENGLISH (US)” OSD language, this is displayed as “PICTURE”.

Advanced settings

Item	Effect					Details
Input level	Less	More	Adjustment of parts which are extremely bright and hard to see.
Gamma	Down	Up	S Curve	2.0	2.2		2.6
W/B High			Adjusts the white balance for light red areas.
R	Less	More
W/B High			Adjusts the white balance for light green areas.
G	Less	More
W/B High			Adjusts the white balance for light blue areas.
B	Less	More
W/B Low R	Less	More	Adjusts the white balance for dark red areas.
W/B Low G	Less	More	Adjusts the white balance for dark green areas.
W/B Low B	Less	More	Adjusts the white balance for dark blue areas.

Notes:

•Carry out “W/B” adjustment as follows.

1.Adjust the white balance of the bright sections using the “W/B High R”, “W/B High G” and “W/B High B” settings.

2.Adjust the white balance of the dark sections using the “W/B Low R”, “W/B Low G” and “W/B Low B” settings.

3.Repeat steps 1 and 2 to adjust.

Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.

•The adjustment values are memorized separately for each input terminal.

•The adjustment range values should be used as an adjustment reference.

Helpful Hint ( / Normalise Normalisation)

On the remote control unit, while the “Advanced settings” menu is displayed, if either the N button is pressed at any time or the ACTION () button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.

25