Panasonic Command Control, PJLink™ Protocol, Using Network Function, Note:, Supported commands, Supported commands, PJLink™ security authentication

Using Network Function

Command Control

Network function of the unit can control the unit in the same way as serial control from a network.

Supported commands

Commands used in the serial control are supported. (see page 12)

Note:

Consult your local Panasonic dealer for detail instructions on command usage.

PJLink™ Protocol

The network function of the unit conforms with PJLink™ class 1 and you can operate the following actions from your computer using PJLink™ protocol.

•Display setup

•Display status query

Supported commands

Commands to control the unit with PJLink™ protocol are shown in the table below.

Command	Control	Remark
POWR	Power control	Parameter
		0 = Standby 1 = Power “On”
POWR ?	Power status query	Parameter
		0 = Standby 1 = Power “On”
INPT	Input switch	Parameter
INPT ?	Input switch query	See the parameter for command INST ?
AVMT	Shutter control	Parameter
		10 = Picture On (picture mute deactivated), 11 = Picture Off (picture on mute)
		20 = Audio On (audio mute deactivated), 21 = Audio Off (audio on mute)
		30 = Shutter mode Off (picture and audio mute deactivated)
		31 = Shutter mode On (picture and audio on mute)
AVMT ?	Shutter control query	Parameter
		11 = Picture Off (picture on mute)
		21 = Audio Off (audio on mute)
		30 = Shutter mode Off (picture and audio mute deactivated)
		31 = Shutter mode On (picture and audio on mute)
ERST ?	Error status query	Parameter
		First byte: 0
		Second byte: 0
		Third byte: 0
		Fourth byte: 0
		Fifth byte: 0
		Sixth byte: Means other error. 0 or 2.
		Meaning of the 0 – 2 settings:
		0 = Error is not detected, 2 = Error
LAMP ?	Lamp status query	Not supported
INST ?	Input switch list query	Parameter	31: HDMI1 input (HDMI1)
		11: PC IN input (PC)
		32: HDMI2 input (HDMI2)	32: DVI-D IN input (DVI)
NAME ?	Projector name query	Return the Display name contents selected in “Network Setup”.
INF1 ?	Manufacturer name query	Returns “Panasonic”
INF2 ?	Model name query	Returns “65LFE7U”/“65LFE7E” (for 65-inch model)
INFO ?	Other information query	Returns version number
CLSS ?	Class information query	Returns “1”

PJLink™ security authentication

Set “panasonic” for the PJLink™ password.

• PJLink™ is a pending trademark in Japan, the United States, and other countries or areas.

48