Using Network Function

Network Connection

This unit has a network function to control the network connected display with your computer.

Note:

To use the network function, set each “Network Setup” setting and make sure to set the “Control I/F Select” to “LAN”. (see page 41)

When “LAN” is set, power indicator lights orange under the condition of power “Off” with remote control (stand-by state).

Example of network connection

COMPUTER

LAN cable

Display (main unit, rear)

(Shielded)

 

Use the

 

Shielded Twist

 

Pair (STP) LAN

 

cable.

 

Hub or broadband router

Notes:

•Make sure the broadband router or hub supports 10BASE-T/100BASE-TX.

•Use a LAN cable that is compliant with “CAT5” when connecting a device that supports 100BASE-TX.

•For instructions on how to connect, consult your network administrator.

47