Panasonic NETWORK SETTING (NETWORK SETTING Screen), Password Setting (CHANGE PASSWORD Screen)

Using Web Browser Control

NETWORK SETTING (NETWORK SETTING Screen)

Click NETWORK SETTING from the menu. Various settings of a network can be set. For the details of the setting items, please check LAN Setup under the Network Setup of the unit. (see page 42)

Notes:

•To use a DHCP server, make sure the DHCP server is started.

•During a DHCP server is used, IP ADDRESS, SUBNET MASK, and GATEWAY values cannot be entered.

•When the set values are changed properly, “NETWORK SETTING CHANGED.” message and the changed set items are displayed.

Item	Details
DHCP	Set to ON when a DHCP server is
	used, or OFF when it is not used.
IP ADDRESS	Enter an IP address.
SUBNET MASK	Enter a subnet mask.
GATEWAY	Enter a gateway address.
	Enter the port number used for
PORT	command control. The available
	setting range is 1024 - 65535.
LAN SPEED	Set the connection speed of the LAN
	environment.
NETWORK ID	Set the ID to identify this unit. The
	available setting range is 0 - 99.
SAVE	Save the each set value.

Password Setting (CHANGE PASSWORD Screen)

Click CHANGE PASSWORD from the menu. Password to access the Web browser control can be set. When the password is changed in this screen, the password used for command control and the PJLink™ security authentication is also changed.

Notes:

•The default password is “panasonic”.

•Up to 32 alphanumeric characters can be used for a password.

•When the password is changed properly, “Password has changed.” message is displayed.

Item	Details
OLD	Enter the old password.
PASSWORD
NEW	Enter the new password.
PASSWORD
NEW	Enter the password entered in “NEW
PASSWORD
	PASSWORD” for con¿rmation.
(RETYPE)
	Save the new password. The
SAVE	con¿rmation screen is displayed.
	Click OK to change the password.

51