Panasonic Using Web Browser Control, Before Using Web Browser Control, Access from Web Browser, Unit Setup, Computer Setup

Using Web Browser Control

You can use a Web browser to control the unit and set up a network and password.

Before Using Web Browser Control

To use the Web browser control, the unit and computer setups are required.

Unit Setup

Set each “Network Setup” setting and make sure to set the “Control I/F Select” to “LAN”. (see page 41, 42)

Computer Setup

Disable the proxy server settings and enable JavaScript.

(Windows)

Disable proxy server settings

1 Display [Internet Properties] window.

Click [Start] – [Control Panel] – [Network and Internet]

– [Internet Options].

2 Click the [Connections] tab and then [LAN Settings].

3Deselect the [Use automatic con¿guration script] and [Use a proxy server for your LAN] boxes.

4Click [OK].

Enable JavaScript

1 Display [Internet Properties] window.

Click [Start] – [Control Panel] – [Network and Internet]

– [Internet Options].

2 Set the security level on the [Security] tab to [Default Level]. Alternatively enable [Active scripting] from the [Custom Level] button.

(Macintosh)

Disable proxy server settings

1 From the [Safari] menu, click [Preferences]. General screen is displayed.

2 From the [Advanced] tab, click the [Change Settings…] button next to [Proxies]. Click [Proxies] and set up a proxy server.

3 Deselect the [Web Proxy] and [Automatic Proxy Con¿guration] boxes.

4 Click [Apply Now].

Enable JavaScript

1 Display [Security] of Safari.

2 Select [Enable JavaScript] under [Web content].

Access from Web Browser

Access to the TOP screen of the Web browser control using a Web browser.

1 Start your Web browser.

2 Enter the IP address set with the “LAN Setup” of the unit. (see page 42)

3 Enter the user name and password when the Authentication screen is displayed.

Authentication screen

4Click [OK].

After logged in, the TOP screen of the Web browser control is displayed. (see page 50)

Notes:

ƔThe password used here is the same password used for command control and the PJLink™ security authentication.

ƔDefault user name and password are as follows: User name: user1

Password: panasonic

ƔThe password can be changed on the Password Setup screen after logging in (see page 51). The user name cannot be changed.

ƔUnder no circumstances, Panasonic Corporation or it's associated companies will ask customers their password directly.

Even if you are asked directly, please do not reveal your password.

49