Panasonic TU-IRD20 manual Connection C, Good Picture and Sound Quality

CONNECTIONS

Connection C	TV
Good Picture and Sound Quality
To use this connection you must have:
• TV with RF input (jack)	DSS
	RECEIVER
• VCR with RF and audio/video inputs
• Coaxial and audio/video cables

To connect TV, VCR, and antenna or cable box.

1. Connect coaxial cables and audio/video cables as shown. VCR

To receive DSS® programming:

•TuneTV to channel 3 or 4 (depending on how you set the CH3/CH4 switch on the back of the receiver).

To receive off-air programming (no cable box):

1.Turn off VCR and satellite receiver.

2.Tune TV to desired channel.

To receive cable programming (with cable box):

1.Turn off VCR and satellite receiver.

2.Tune TV to cable box output channel (usually CH2, CH3, or CH4).

3.Tune cable box to desired channel.

IN

					SATELLITE
					DISH
OUT TO TV
	VIDEO	R	L
			AUDIO		CABLE
IN FROM ANT				SATELLITE IN
CH4	VIDEO	R	L		OR
CH3
			AUDIO		OFF-AIR ANTENNA

IN FROM ANT VIDEO IN AUDIO IN

CH3

CH4

R L

OUT TO TV

VIDEO OUT AUDIO OUT

To record DSS® programming:

1.Tune TV to the channel on which you receive the DSS® signal.

2.Tune satellite receiver to desired channel.

3.Set VCR to record on line input.

To view VCR programming:

1.Tune TV to VCR output channel (usually CH3 or CH4).

2.Turn satellite receiver off.

CAUTION

Do not stack electronic components or other objects on top of the DSS Receiver. The slots on top of the receiver must be left uncovered to allow proper airflow to the unit. Blocking the airflow to the unit could impair performance or damage your receiver and other components.

Do not stack the DSS receiver on top of a “hot component” such as an audio power amplifier.

38