REFERENCE
OUT
TO
TV
IN
FROM
ANT
VCR CONTROL
|
|
|
|
| PHONE JACK |
VIDEO | R AUDIO L | WIDE BAND DATA | SATELLITE IN | LOW SPEED DATA | |
CH 4 |
|
|
| REMOTE IN |
|
CH 3 |
|
|
|
|
|
Back Panel
IN FROM ANT Use to connect an
OUT TO TV Use to connect the satellite receiver to yourTV. However, if your TV has audio/video jacks, you should use those jacks to get better picture and sound quality.
CH3/CH4 SWITCH If a coaxial cable is used to connect the satellite receiver to yourTV, you must set the CH3/CH4 SWITCH. For example, to see the DSS® signal on TV channel 3, set the switch to 3.
VIDEO Provides better picture quality than the OUT TO TV jack. If your TV has audio/video capability, use this jack to connect the satellite receiver to your TV. You must also connect the AUDIO jacks.
AUDIO (R and L) Provide better sound quality than the OUT TO TV jack. If yourTV has audio/video capability, use these jacks to connect the satellite receiver to your TV. You must also connect the VIDEO jack.
WIDE BAND and LOW SPEED DATA PORTS These ports allow you to connect the DSS® system to future services and accessories as they become available. A shielded cable and additional hardware may be required.
SATELLITE IN Use to connect the satellite receiver to the satellite dish.
VCR CONTROL Allows the receiver and VCR to communicat with via the VCR controller for timer recordings.
REMOTE IN Use in conjunction with remote control signal senders to control the receiver from another room.
PHONE JACK Use to connect a phone line to the satellite receiver. The DSS® system uses a phone line connection to periodically call out to program providers.
45
