TX32F500A-2912_E Page 7 Saturday, July 16, 2005 12:23 PM

Before Operating This Set

Connecting the Aerial Cable to the RF In Terminal

VHF Aerial

UHF Aerial

Mixer

RF In Terminal

75 Ohm Coaxial Cable

Coaxial Aerial Plug

To obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ohm coaxial) and the correct terminating plug are required. If a communal Aerial system is used, you may require the correct connection cable and plug between the wall Aerial socket and your television receiver.

Your local Television Service Centre or Dealer may be able to assist you in obtaining the correct Aerial system for your particular area and accessories required.

Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs incurred, are the responsibility of you, the Customer.

RF In

Coaxial

Terminal

Aerial Plug

75 Ohm Coaxial Cable

 

Connecting the Plug to the Wall Outlet

Note:

• The On/Off switch on this model does not full disconnect the TV from the mains supply.

How to Turn the Power On

Press the Power switch on Television to turn the set on. (See page 13)

7

Page 7
Image 7
Panasonic TX-32F500A Connecting the Aerial Cable to the RF In Terminal, Connecting the Plug to the Wall Outlet