Panasonic TX-32F500A Before Operating This Set, Battery Installation, Battery cautions

TX32F500A-2912_E Page 6 Saturday, July 16, 2005 12:23 PM

Before Operating This Set

■Battery Installation

1 Open the cover.

Press bottom downward and pull out the cover.

2	Two “R6 (AA)” size	Batteries: Use two “R6 (AA)” size batteries.
		Insert the batteries ensuring correct polarity.

This is identifiable by the “+” and “–” symbols on both the batteries and inside the battery compartment.

3 Replace the cover, and slide in reverse until the lock snaps.

Do not use rechargeable (Ni-Cd) batteries.

They are different in shape and performance and may fail to ensure correct operation.

!Battery cautions

The incorrect use of batteries can cause electrolyte leakage which will corrode the Remote Control or cause the

batteries to burst.

Old Batteries New Batteries

Replacement both batteries at the same time.	Don’t mix battery types	Don’t recharge.
	(alkaline with carbon, zinc etc.)

6