Fixing screws (3 pcs.)
Housing base 
Positioning pin
Camera
Protection Cover
Step 5
Attach the front and rear sunshields (accessory) to the camera.
qPut the fingers on the dents of the front and rear sun- shields to detach the hooks. The sunshields will be divided into two parts.
For loss prevention, one side of the front and rear sunshields are linked together with a wire.
Dents
Wire
Detach the hooks.
w Locate the front and rear sunshields to the position that covers the housing base.
Housing base
eJoint both sides of front and rear sunshields.
Joint the hook and dent on the linked side, and then joint the other side.
Front and rear sunshields
Main sunshield
Safety wire
IMPORTANT:
•Joint both sides of the front and rear sunshields before fitting in the main sunshield.
•Do not trap the safety wire inside.
•The safety wire is designed to support only the weight of the camera when the camera falls.
Do not put an excessive weight that the safety wire cannot support.
Step 6
Fit the front and rear sunshields in the main sunshield. Align “h” of the rear sunshield to “g START” of the main sunshield. Then, turn the front and rear sunshields toward “g LOCK” until a click is heard.
Front and rear sunshields
Main sunshield
Align “h” to this “g”.
| Front and rear sunshields |
24 | (accessory) |
|
