Panasonic WV-SW598 Specifications, Alarm in 1 BLACK/WHITE IN/ Alarm in 2 Alarm OUT

Specifications

• Basic

Power source:	24 V AC±15 %, PoE+ device (IEEE802.3at compliant) or Tested PoE injector (60 W)
Power consumption:	AC power supply:	24 V AC (50 Hz/ 60 Hz)/ 3.5 A/ 55 W
	Tested Power over Ethernet (Injector: 60 W): 54 V DC/ Approx. 1.0 A/ 50 W
	PoE+ device:	54 V DC/ Approx. 470 mA/ 25 W (Class 4 device)
Standby power *1:	AC power supply:	24 V AC (50 Hz/ 60 Hz)/ 720 mA/ 10 W
	Tested Power over Ethernet (Injector: 60 W): 54 V DC/ Approx. 175 mA/ 9.5 W
	PoE+ device:	54 V DC/ Approx. 165 mA/ 9.0 W (Class 4 device)
Ambient operating temperature:	–50 °C to +55 °C {–58 °F to +131 °F} (24 V AC/ Tested PoE injector (60 W)) *2
	–30 °C to +55 °C {–22 °F to +131 °F} (PoE+ device)
	(During start-up: –30 °C to +55 °C {–22 °F to +131 °F}
	(24 V AC/ PoE+ device/ Tested PoE injector (60 W))*2)
Ambient operating humidity:	Less than 90 % (no condensation)
Storage temperature:	–50 °C to +70 °C {–58 °F to +158 °F}
Storage humidity:	Less than 95 % (no condensation)
Monitor output (for adjustment):	VBS: 1.0 V [p-p]/75 Ω, composite (BNC)
External I/O terminals:	ALARM IN 1 (BLACK/WHITE IN)/ ALARM IN 2 (ALARM OUT)/
	ALARM IN 3 (AUX OUT) (x1 each)
	BLACK/WHITE IN, ALARM OUT, and AUX OUT can be used by changing the settings
	of Terminal 1, Terminal 2, and Terminal 3.
Microphone/line input:	ø3.5 mm monaural mini jack
	Input impedance: Approx. 2 kΩ (unbalanced)
For microphone input:	Applicable microphone: Plug-in power type
	Supply voltage: 2.5 V ±0.5 V
	Recommended sensitivity of microphone: -48 dB±3 dB (0 dB=1 V/Pa, 1 kHz)
For line input:	Input level: Approx. –10 dBV
Audio output:	ø3.5 mm stereo mini jack (monaural output):
	Output impedance: Approx. 600 Ω (unbalanced)
	External speaker with an amplifier:
	Output level: -20 dBV
Water resistance:	IEC60529 (IP66, Against ingress of water with harmful effects powerful jetting)
Heater unit:	Turns on automatically when the inside temperature drops below 10 °C {50 °F}.
Dimensions:	ø229 mm x 357 (H) mm {ø9-1/32 inches x 14-1/16 inches (H)},
	diameter of the dome: 160 mm {6-5/16 inches}
Mass:	Main body: Approx. 5.0 kg {11.02 lbs}
Finish:	Main body:	Aluminum die cast with glazed melamine coating
		(Coating color: Natural silver)
	Sunshields*3:	ASA resin coating (Coating color: Natural silver)
	Dome cover section:	Clear polycarbonate resin (Rain wash coating)

*1 This is the power consumed when only sending video signals, and when other functions such as pan/tilt, SD recording, and the heater are not operated.

*2 When using the camera in low temperature environments, because the heater warms the camera to keep its internal temperature above –10 °C {14 °F}, keep the power for the camera always turned on. Perform settings or startup operations when the ambient temperature is –30 °C {–22 °F} or higher.

*3 It is impossible to remove the main sunshield.

• Camera

Image sensor:	Approx. 1/3 type MOS image sensor
Effective pixels:	Approx. 2.4 megapixels
Scanning area:	5.38 mm (H) × 3.02 mm (V) {7/32 inches (H) x 1/8 inches (V)}
Scanning system:	Progressive

36