Step 7
Fix the front and rear sunshields on the camera using the front/rear sunshield fixing screw (accessory). (Recommended tightening torque: 0.72 N·m {0.53 lbf·ft})
Front/rear sunshields xing screw
Note:
•When removing the front and rear sunshields, perform steps 5 - 7 in the reverse order. (☞ Pages 24 and 25)
Step 8
After the installation is completed, remove the tape wrapped around the camera while holding the Protection Cover, and then take off the Protection Cover.
Camera
Tape
Dome cover
Protection Cover
25
