Panduit DPOE24S1XY, DPOE12U1XY, DPOE24U1XY manual Network Status LED Indications

PANDUIT® DPoE™ Power Patch Panel User’s Guide	Issue 2.2
	Part Number: PN378A

LED Color	Port LED Status	Description
Red	Solid	The system has failed to determine
		the PD power requirements for this
		port. Perhaps this PD is not an
		802.3af-2003 compliant or Cisco
		legacy power device. It could also
		be a port configured for 802.3af-
		2003 and an alternate PoE device
		has been connected.
		Also, pins (4,5) & (7,8) of a
		connected non-powered device
		such as a PC may be terminated in
		such a way that the power patch
		panel attempts to detect it as a PD.
		The Element Manager may be used
		to turn detection off (see Element
		Manager section) to this port so no
		further checks occur. The LED will
		extinguish.
		This may also be an indication of a
		short in the wiring. The connections
		at both ends of the horizontal
		cabling should be checked to
		ensure proper wiring has been
		followed.

Status of Power Ports

Power is NOT being delivered down this port on the panel.

Table 10: Network Status LED Indications

LED Color	Network LED	Description	Notes
	Status
Off	Off	No connection to the	If the system is otherwise operating
		management system.	normally and an Ethernet 10/100 cable
			is connected, this could be an issue
			with the panel's management interface.
Green	Flashing	The management link on the	Normal operation.
		DPoE™ Power Patch Panel
		is configured correctly and
		communication messages are
		currently being processed.
Green	Solid	The management link on the	Normal operation.
		DPoE™ Power Patch Panel
		is configured correctly, but no
		communication messages are
		currently being processed
		(i.e., the link is idle).
Amber	Solid	The panel is currently trying	If this persists for more than a minute or
		to acquire DHCP address	two, the daisy chain of connections
		information from the network.	between multiple panels may be
			incorrect or there are problems at the
			DHCP server.

18