PANDUIT® DPoE™ Power Patch Panel User’s Guide | Issue 2.2 |
| Part Number: PN378A |
|
|
4.Enter the TFTP information in the EM screen and then click on the Begin Update button.
5.Observe the System status LED begins flashing red on the DPoE™ Power Patch Panel. See Table 12A: DPoE™ Power Patch Panel Firmware Update LED status for the LED activity during the Firmware update.
6.Allow sufficient time for the Firmware Update to complete. (Approximately 10 minutes)
7.When the Firmware Update is complete the System status LED resumes flashing green.
Table 13A: DPoE™ Power Patch Panel Firmware Update LED Status
System LED | Network LED |
Color and activity | Color and activity |
Red Solid | Off |
| Amber Solid |
| Green Blink |
|
|
State Description
Ethernet Switch
Initialization
DHCP Initialization
DHCP complete
Elapsed Time
00 – 01 seconds
01 – 100 seconds
51