PANDUIT® DPoE™ Power Patch Panel User’s Guide | Issue 2.2 |
| Part Number: PN378A |
|
|
APPENDIX 1 – DPOE24S1X AND DPOE24S1XY
INSTALLATION
The PANDUIT® DPoE™ Shielded Power Patch Panel requires a direct connection to a nominal 48VDC supply. An individual power supply may be purchased separately from PANDUIT Corp or other vendors. Installation instructions for the individual power supply are included with that product. PANDUIT Corp provides multiple individual power supply options as listed below.
Table 14: Power Supplies Available from PANDUIT Corp.
PANDUIT Part Number | Description |
DPOEPWRB120 | 120 watt power brick - 48 volt output |
| Unmanaged power chassis - supports 3 |
| rectifiers and optional Network Interface Card |
DPOEPWRCU | (NIC) |
| 500 watt rectifier for use in the DPOEPWRCU |
DPOEPWRR500 | chassis |
| 1250 watt rectifier for use in the DPOEPWRCU |
DPOEPWRR1250 | chassis |
Power cord for Australia | |
Power cord for Europe | |
Power cord for USA | |
|
|
Power cord for the U.K. | |
|
|
Package Contents
Each PANDUIT® DPoE™ Shielded Power Patch Panel is shipped in a box that includes the following:
Table 15: Package Contents
Item | Quantity | Notes |
DPOE24S1X or DPOE24S1XY Power Patch Panel | 1 | The shielded version of the |
|
| DPOE24U1X or DPOE24U1XY. |
Rear shields | 2 | Top and bottom rear shields. |
|
|
|
Wiring Template Label | 1 | For use on the rear panel of the |
|
| DPOE24S1X or DPOE24S1XY – |
|
| Supports either EIA/TIA 568A or |
|
| 568B wire positions. |
Quick Installation Instructions | 1 | PANDUIT Part Number PN404 |
DPOE™ Power Patch Panel Installation Worksheet | 1 | PANDUIT Part Number PN377 |
|
|
|
53
