Organiser
Converter | [7.6] |
Select ‘Menu>7.Organiser>6.Converter’.
Converter converts a figure between different units i.e. Length, Area, Volume, Weight, and Temperature.
Select one from Length, Area, Volume, Weight, or Temperature.
Press the [d] key to move to the next line, press the [l/r] key to select a target unit, and press the number keys to input numbers.
Press the [d] key again to move to the next line and select a result unit and you will get the correct answer.
Tip: The result is automatically recalculated upon a change of unit or value.
Press the [.] Soft key to input a decimal point.
Stop Watch | [7.7] |
Select ‘Menu>7.Organiser>7.Stop Watch’.
The Stop Watch measures time for all sorts of sports. Press the [ 
] key to operate the Stop Watch.
Press the [ 
] key to pause the Stop Watch and press the [ 
] key to restart the Stop Watch.
Whenever you select the [Lap] Soft key, the 4 lap times as a maximum are displayed and when you select the fourth [Lap], the Stop Watch stops.
Press the [Reset] Soft key to initialise all.
Organiser 
Timer | [7.8] |
Select ‘Menu>7.Organiser>8.Timer.’
Sets the alarm bell to ring at a preset time.
Press the [Set] Soft key to input a time and minute for countdown and press the [o] key for setup.
Press the [ 
] key after input and the displayed time will start counting down. Now, press the [ 
] key to pause the countdown and press the [ 
] key to restart the countdown.
After the preset time, an additional animation and alarm sound will be provided. Press the [Stop] Soft key to pause both.
Press the [Set] Soft key to return to the initial state while Timer is out of operation. When the alarm is ringing with animation at the set time, stop their motion to return to the initial state.
122 | 123 |
